7132 pts ยท October 27, 2012
im a 23 year old engineering student, i love adventure and just goofing around with friends, love to jam. Listen to alternative rock mostly, hobbies are song writing, working out, watching movies.
oh damn! i need to see that!
not completely, i tried but i didnt get the shine I wanted out of it. Pic for reference when the lights are off
I made the doors using a hollowed out door frame with LED lights laid out evenly inside, then I put a layer of thick plexi glass as the front, I covered the plexiglass in vinyl and painted that vinyl to match my walls and then used crafting knives to cut out the design so the light can shine through, then painted over the design so it sortof looks invisible until the light turns on. The doors only light up when approached, im planning on having them automatically open when u say melon as well
https://vt.tiktok.com/ZSmLKh5XK/
yup!
painted, scraped off and then painted again so it appears one with the wall :D. Light is FCOB LEDs layered on a reflective sheet inside the door
soon!
thank you so much! I actually thought of doing that but my basement doesnt get enough light and i wanted to be able to change the color and brightness :P
Soon!
Thank you so much! :D
if you're in doubt, follow your nose?
Thank you!
I basically got 2 30x80 doors, took the front off and cleaned out the guts, layered it a reflective sheet and FCOB LEDs, then used an industrial grade glue to secure a thick sheet of plexiglass (kinda like a shadowbox), the plexiglass weighs more than the door itself so i made sure to use the right glue lool
sherwin-williams emerald urethane trim enamel, i needed something that would bond well to the vinyl I had over the plexiglass, needed a paint that wouldnt peal eathier and is a bit flexible
Years ago on this site, I saw a DIY project that I loved so much, I promised myself once I own a house i will do something like it but better, instead of one door im going to do 2 and have them as movie accurate as I can. Finally, more than a decade later, here it is!
i think the pants on fire bar for Hillary should be in the top 3, she doesnt tell the truthiest truth
these arent random, they were carefully selected
very good stuff! i especially loved the second one and will be using it as a phone wallpaper if thats ok
arent we all :D
me too! never thought id even find Windsor here :P
i would soooo buy this :|
what happened after the roast http://images.wisegeek.com/whole-pig-roasted.jpg
the world would be a nicer place if girls "just walked" like that
hell yaaa! thank you! :D
guy in pic #2 is farting
how is Dave a short film
dwarves "blaze it" quite often and look wat happened to them..
last one deserves an A!
that's actually very fascinating! thanks for the info
oh damn! i need to see that!
not completely, i tried but i didnt get the shine I wanted out of it. Pic for reference when the lights are off
I made the doors using a hollowed out door frame with LED lights laid out evenly inside, then I put a layer of thick plexi glass as the front, I covered the plexiglass in vinyl and painted that vinyl to match my walls and then used crafting knives to cut out the design so the light can shine through, then painted over the design so it sortof looks invisible until the light turns on. The doors only light up when approached, im planning on having them automatically open when u say melon as well
https://vt.tiktok.com/ZSmLKh5XK/
yup!
painted, scraped off and then painted again so it appears one with the wall :D. Light is FCOB LEDs layered on a reflective sheet inside the door
soon!
thank you so much! I actually thought of doing that but my basement doesnt get enough light and i wanted to be able to change the color and brightness :P
Soon!
Thank you so much! :D
if you're in doubt, follow your nose?
Thank you!
I basically got 2 30x80 doors, took the front off and cleaned out the guts, layered it a reflective sheet and FCOB LEDs, then used an industrial grade glue to secure a thick sheet of plexiglass (kinda like a shadowbox), the plexiglass weighs more than the door itself so i made sure to use the right glue lool
sherwin-williams emerald urethane trim enamel, i needed something that would bond well to the vinyl I had over the plexiglass, needed a paint that wouldnt peal eathier and is a bit flexible
Years ago on this site, I saw a DIY project that I loved so much, I promised myself once I own a house i will do something like it but better, instead of one door im going to do 2 and have them as movie accurate as I can. Finally, more than a decade later, here it is!
i think the pants on fire bar for Hillary should be in the top 3, she doesnt tell the truthiest truth
these arent random, they were carefully selected
very good stuff! i especially loved the second one and will be using it as a phone wallpaper if thats ok
arent we all :D
me too! never thought id even find Windsor here :P
i would soooo buy this :|
what happened after the roast http://images.wisegeek.com/whole-pig-roasted.jpg
the world would be a nicer place if girls "just walked" like that
hell yaaa! thank you! :D
guy in pic #2 is farting
how is Dave a short film
dwarves "blaze it" quite often and look wat happened to them..
last one deserves an A!
that's actually very fascinating! thanks for the info