44918 pts ยท July 28, 2014
Top right is my signature, bottom right is the horde insignia from warcraft
An odd choice for a meme tag
I think it's mostly because it's a reply to a comment
Idk why you're being downvoted. Most grammatical errors are tolerable but it's like every other word was incorrect
Maybe it's sleep deprivation but I laughed my ass off at that
The edges are so small it'd be tough to fit in while still making them cost effective (lower labor costs)
Essentially just butt joints with the lower floor attached to both walls of the corner. As much as I'd like to do box joints or dove tails,
I do a lot of woodworking, these are just some fun projects of mine. Their purpose isn't more than to just relax and play in the sand
Etsy.com/shop/CutlassWoodworking
She is left handed
Cutting board I could do, and what?
I could make one, my store does custom orders. I thought about putting them up as a normal listing
Yes, etsy.com/shop/CutlassWoodworking
The same way you drag and drop on a pc, but with your finger of choice
Sorry, I don't get the reference
I don't work with plans. I don't like making cookie cutter projects.
Any time!
Oh I'm sure he'd be able to figure it out. It's really just creating a blank, and cutting and sanding away everything that isn't the ring
Save time in sanding. I use a belt sander and a lathe for my sanding which goes much faster but I don't know what tools you have
Sand the faces of the thin pieces flat, glue the faces together, then drill and sand the shape of the ring. You can also cut it round to 1/2
Oh yeah. I cut 2 pieces very thin, sanded them flat, then glued them together, that's all
im not convinced that isn't shit in that bag.
thank you, i appreciate that.
jam the ring on a piece of cork or wood on the drill, run it at speed, sand away the outer material. then its just finding a finish you like
technique changes with tools, if you have a drill/dremel you can do it pretty easily. Drill a hole in wood, sand/file out the hole to fit1/2
Thank you! The coasters are covered in a bar-top resin, I'm in love with the stuff too, it just takes patience to work with
Why thank you, anyone can make stuff like this with some time and materials
Thank you! Yeah it's actually a pretty common issue in woodworking, making sure it's all food safe
Which has an irritant dust, but it's pretty much fine once sealed up and dust removed
Top right is my signature, bottom right is the horde insignia from warcraft
An odd choice for a meme tag
I think it's mostly because it's a reply to a comment
Idk why you're being downvoted. Most grammatical errors are tolerable but it's like every other word was incorrect
Maybe it's sleep deprivation but I laughed my ass off at that
The edges are so small it'd be tough to fit in while still making them cost effective (lower labor costs)
Essentially just butt joints with the lower floor attached to both walls of the corner. As much as I'd like to do box joints or dove tails,
I do a lot of woodworking, these are just some fun projects of mine. Their purpose isn't more than to just relax and play in the sand
Etsy.com/shop/CutlassWoodworking
She is left handed
Cutting board I could do, and what?
I could make one, my store does custom orders. I thought about putting them up as a normal listing
Yes, etsy.com/shop/CutlassWoodworking
The same way you drag and drop on a pc, but with your finger of choice
Sorry, I don't get the reference
I don't work with plans. I don't like making cookie cutter projects.
Any time!
Oh I'm sure he'd be able to figure it out. It's really just creating a blank, and cutting and sanding away everything that isn't the ring
Save time in sanding. I use a belt sander and a lathe for my sanding which goes much faster but I don't know what tools you have
Sand the faces of the thin pieces flat, glue the faces together, then drill and sand the shape of the ring. You can also cut it round to 1/2
Oh yeah. I cut 2 pieces very thin, sanded them flat, then glued them together, that's all
im not convinced that isn't shit in that bag.
thank you, i appreciate that.
jam the ring on a piece of cork or wood on the drill, run it at speed, sand away the outer material. then its just finding a finish you like
technique changes with tools, if you have a drill/dremel you can do it pretty easily. Drill a hole in wood, sand/file out the hole to fit1/2
Etsy.com/shop/CutlassWoodworking
Thank you! The coasters are covered in a bar-top resin, I'm in love with the stuff too, it just takes patience to work with
Why thank you, anyone can make stuff like this with some time and materials
Thank you! Yeah it's actually a pretty common issue in woodworking, making sure it's all food safe
Which has an irritant dust, but it's pretty much fine once sealed up and dust removed