bmentat
351298
7069
80
Slow-Motion Metal Working!
All footage from the Ingersoll Cutting tools channel on youtube here:
https://www.youtube.com/channel/UCY2WDQFAfKRVuF7nvD4-Zow
There are some more really cool ones there, I just picked the ones I liked.
ChuckTaylor
I can almost feel the bee sting like burn of the chips hitting me. Caught one in the lip yesterday. That sumbitch hurt
nycwill
*heavy breathing*
medicofdeath
*Heavy metal breathing*
freegiant
So, based on the comments, these GIFs are the best sex a lot of imgurians have had in a while.
WarpPig
You are a god among men for bringing me this
bigpapaike
As a mechanical engineer...such boner, much fap
SNOWoftheBLACK
NSFW
cheesywonton
No lube? You slut.
parangaricutirimicuaro
I've waited my whole life for this post.
flowseeker
i am legitimately afraid of what my erection means right now.
Lustig1374
slut
SSgtObvious
Embrace it!... The erection
Taalii
It means you have a perfect appreciation for the beauty of a steel tool...cutting steel.
Lustig1374
slut
SithRuleOfTwo
When that first gif slowed even more: http://www.reactiongifs.com/r/fckya.gif
masterbelch
SgtHambone
That's hot, literally and figuratively.
imherefortheveggiecomics
*switches tabs so the gifs all load up while i get my safety eyewear*
HughLaurie
Yeah I loved these but I kept squinting instinctively.
TheHappyHermit
"There is no more important safety rule than to wear these safety glasses"
ChingChongWhatTheFuck
I never forget my eye-pro. Well, at least, not since the accident.
BioMead
And that's legitimately the reason I'm blind in one eye...
Taalii
As somebody who wears glasses...Wear your goggles anyway because they don't protect from sides or above. Eyes are not replaceable. Yet.
edzellblue
I think I might need my safety underwear as well.
4chansbboard
OSHA will get on you if you don't have the proper PPEs
dooky710
Thanks ass, now I need new pants
YOUPROBABLYSAWTHISNAMEINTHECOMMENTSANDLOOKEDBECUASEITSALLCAPS
Why would you thank your ass? After all It made the mess..
smilethingsareworsethantheyseem
YOUPROBABLYSAWTHISNAMEINTHECOMMENTSANDLOOKEDBECUASEITSALLCAPS
Perfect
HugeWaspNest
That's fucking metal!
Catumi
They even play fucking metal while fucking metal with a fucking piece of metal. https://www.youtube.com/watch?v=A0A8qTKZYyI
NIC0LANGEL0
Nah... That's boring.
flowseeker
AHHHHHH i c wat u did therrrrrr
TheMadGambler
Fucking metal you say?
ImSorryForTheLackOfApostrophe
That's metal fucking!
johnnysockpuppet
THIS.
BeerFueledAdventurer
This gives me the weirdest bon......I came
Therealcrotalus
With all this metal working, why do I have a woody?
TehSpacemanSpiff
Thanks for giving me something I didn't know I wanted. This is bad ass.
Somethingswrongintheneighbourhood
It's so weird seeing all of these machining processes running without lubrication
Ohmyglobwhat
#7 did things for me...
zettovyker
I came.
deathson10
@Gavinofree
TravisKOP
The quality of these gifs is giving me a boner
myshoesarefilledwithblood
Im so turned on right now
KaJuN
Real-time metal working:
amberkc
I cringe every time I see the part with the saw and his hand inching towards it.
WhatDoYouMeanBeerIsntFood
Long hair and machinery don't mix well. I saw a young guy get his scalp ripped off when his hair got caught up in a machine he was srvcing
amberkc
I cringe every time I see the part with the saw and his hand inching towards it.
holgerdk
So unsafe, but still awesome :)
ErinInStereo
balcsida
Thanks, @Mrsupersonic8! :3
flowseeker
such brevity. very eloquence. wow.
Abtrogdor
iwaspromisedsnacks
My friends think I am looking at porn, I am
JJtheSpaceGhost
Why do I have a boner from all this sweet metal cutting, Hnnnnngggggg!
DarkWingDerpy
Just don't cut your boner on the sharp metal.
ErinInStereo
Instructions unclear, dick cut off by buzzsaw.
LazyBunnyKiera
I love how the individual tips can be replaced, as someone that burns through drill bits quickly, i can really appreciate that.
tooomanysteves
Ditto. Those must be very expensive tools, never seen anything like that before.
Enteyex367
also that massive insert endmill, holy shit I've never seen so many inserts in one tool
UnreasonableSteve
Yeah, jesus, that's gotta be a pricey endmill (along with the inserts...) Wonder what the dimensions of it are.
centracing
We had one at school that was like 6" dia by 8" cutting length. Never used it because it costs so much in inserts lol. It was donated to us.
ThePrintingPress
As someone who machines parts, I can confidently say that this is basically porn for machinists.
iamOzymandiasLookOnMyWorksDumbassAndDespair
I dunno, some of them are boring.
TerryCruise
As someone who makes these tools for you machinists, I'm disappointed in the lack of solid Carbide Mills.
noespeakienglish
I think my dad would definitely enjoy these gifs
Utamey
As someone who doesn't know shit about stuff like this, I'm currently very confused about my sexuality.
jayneebutidontgotagun
i'm not a machinist and i'm sure i have a boner.... i don't have a penis but i'm pretty sure this is what a boner feels like...
CletusMcFertherburger
Fellow machinist here, and I was about to make the same exact post. Those are some sexy tools.
mosqu
This is porn for anyone who works with metals. I literally have the weirdest boner ever I've had...
Jester8088
11yr machinist here. Agreed.
hurrication
Those are some good 6's and 9's coming off the single point tools.
Erdan
As a "Machinist" (army job qualifier), even though I don't know what half these things are, this is porn for me.
kungfuman
And engineering grad students who have to machine their own components!
Takos360
I help make some of the tools you see here :)
HowDoIInternet
Where is the coolant though? They're going to need to replace all of those drills after like 10 minutes. Even though it's aluminum.
Protean2648
Generally we don't use coolant for plaque(?) tools where I'm from, unless it's very "sticky" or hard.
TheDustman
Also, with interrupted cuts, coolant can shock the carbide, it gets heated in the cut then rapidly cooled, this causes cracking and chips.
tomyironmane
I didn't wanna say nothing, but the depth of those passes I was wondering why they were going in dry....
TheDustman
Knowing when to use coolant and carbide is important, carbide is not always superior to HSS, coolant is not always beneficial.
daisyb1114
I was thinking the same thing after my orgasm. "Bite the pillow, bitch. I'm going in dry."
TheDustman
Coatings work better without coolant as heat causes the aluminum in the coating to oxidize faster,making a better barrier against edge wear
fhdhbcb
Probably leaving it out to get better shots
MadeOfSteel
Most of those are stainless steel. Depending on the spindle speed and feed rate, coated inserted tools don't need coolant for stainless
TheBiggestDinosaurYouHaveEverSeen
Cut it slower you slut.
Kinbrielle
"Slower slut" is my new fav comment here. Was hoping it was top comment but 3rds not bad
TheBiggestDinosaurYouHaveEverSeen
Best I've ever done!
GalapagosStoat
oh god yes, now spit on me and tell me i'm worthless
breadedfishstrip
Just drizzle that fucking coolant all over my bit
QuadrilateralEnix
(ಠ_ಠ) I think you guys are getting a little too into this.
CanadianEngineer
Just into it enough!