1775 pts · August 3, 2012
Move along, nothing to see here.
1st Layer height too close to bed. Combined with leveling the bed a bit more.
https://myfloridahistory.org/frontiers/radio/program/394 First part of this episodes talks more about that area
Also, just look at adjusting the z offset... I use a duet and you can microstep once the print starts to do minor raise/lowers of .05mm
I dont use my bltouch anymore because I didnt feel like I got good enough results.
I tend to print at .19 layer height, just a happy place I found over time. And for bed leveling I just real time level w/ adjustment screws
Fan is running, CPI temp is high. Might need to check thermal paste/redo it. If using an aio make sure no leaks it hasn’t evaporated.
Too close to bed (or super small layer height) and guessing bed level also an issue as it got to that corner.
I saw the stuff and thought “this actually looks real”
My first thought, wow realistic!
Print head too close to bed.
Did this same thing for the Halo trial on pc on a 56k
The shark subs were the only series that I had all of them.
As an owner of two Dan cases and an afol. I’ve spent entirely too much money on both.
That’s a decision that came after wanting to make it work. Trying to make it work. And coming to the realization, that he wouldn’t be happy.
Tandy, now that’s a name I haven’t heard in a while. *Changes to channel 3 in the Zenith*
Back in the day (when favorites started) all upvotes were saved as favs
I’ve got some Louisiana hot sauce on my desk rn. Also doesn’t have it.
I’m on 2.4.0 on iOS without ads. Since getting a new phone though ios11 hyperlinks in app won’t open when clicked. Can copy paste if needed.
Beef Sliders.
So this is how it begins...
One of my first sets was from this line. Fell in love with it and Legos!
I still run one of the first iterations of the app. It even carried over to my newest phone. Links stopped working. Worth the copy paste.
But it looks like you should only know about bird law, do you know these things because they still made you take the... bar exam.
I can see it
I lack the patience to be this petty. Bravo.
"Huh... expected the Rocky Mountains to be a little rockier than this. I was thinking the same thing That John Denver was full of shit man"
Read the 4th paragraph for ref.
The current proposed regulation change, removes the states ability to maintain their own regulations. (ie their own net neutrality)
But the time money and effort to challenge something (with a lot of lawyers involved in making it) wouldnt happen
1st Layer height too close to bed. Combined with leveling the bed a bit more.
https://myfloridahistory.org/frontiers/radio/program/394
First part of this episodes talks more about that area
Also, just look at adjusting the z offset... I use a duet and you can microstep once the print starts to do minor raise/lowers of .05mm
I dont use my bltouch anymore because I didnt feel like I got good enough results.
I tend to print at .19 layer height, just a happy place I found over time. And for bed leveling I just real time level w/ adjustment screws
Fan is running, CPI temp is high. Might need to check thermal paste/redo it. If using an aio make sure no leaks it hasn’t evaporated.
Too close to bed (or super small layer height) and guessing bed level also an issue as it got to that corner.
I saw the stuff and thought “this actually looks real”
My first thought, wow realistic!
Print head too close to bed.
Did this same thing for the Halo trial on pc on a 56k
The shark subs were the only series that I had all of them.
As an owner of two Dan cases and an afol. I’ve spent entirely too much money on both.
That’s a decision that came after wanting to make it work. Trying to make it work. And coming to the realization, that he wouldn’t be happy.
Tandy, now that’s a name I haven’t heard in a while. *Changes to channel 3 in the Zenith*
Back in the day (when favorites started) all upvotes were saved as favs
I’ve got some Louisiana hot sauce on my desk rn. Also doesn’t have it.
I’m on 2.4.0 on iOS without ads. Since getting a new phone though ios11 hyperlinks in app won’t open when clicked. Can copy paste if needed.
Beef Sliders.
So this is how it begins...
One of my first sets was from this line. Fell in love with it and Legos!
I still run one of the first iterations of the app. It even carried over to my newest phone. Links stopped working. Worth the copy paste.
But it looks like you should only know about bird law, do you know these things because they still made you take the... bar exam.
I can see it
I lack the patience to be this petty. Bravo.
"Huh... expected the Rocky Mountains to be a little rockier than this. I was thinking the same thing That John Denver was full of shit man"
Read the 4th paragraph for ref.
The current proposed regulation change, removes the states ability to maintain their own regulations. (ie their own net neutrality)
But the time money and effort to challenge something (with a lot of lawyers involved in making it) wouldnt happen