Feb 9, 2021 4:54 PM
SamFox95
98600
2055
56
temposaur
Needs more resin
BurnieCinders
/r/epoxyhate
Yellowchopsticks
MutteringMisanthrope
MetaSomma
But seriously, where do we buy these things?
lilmookieesquire
Epoxy shavings :(
DarksteelPenguin
I'll try spinning, that's a good trick!
Sleepingpanda1260
chrochtato
i was like "noo don't cut the support, can't use it as butt plug without it."
ButIBuildAThousandBridges
Well, not with that attitude.
snooch2thegouch
Psionickitten
This is a buff.
Zega000
Now it can roll off your shelf
GreatDaneGirl
Can people give a few more seconds of video to the final product? You wielded hard, I watched the boring lathe part, I need to see it better
jodeum21383950
If only there was a pause button.
Valid point, but I sort of wanted to see the video showing it from several sides.
Prometheus94
Do you ever go too far and knick the object in the sphere? I feel like I would be too nervous to mess up the subject in the resin.
Zahnradfee
So much microplastic!
EdinburghSwordmaker
Source https://www.instagram.com/scottsminiwoodshop/?hl=en
Shuey
Why not keep it square? ?
tremblesosoftly
I like the part that it goes fast
staryjdido
Perfect example of why this planet has no chance. Just imagine the trail of the oil used and wasted to make this plastic trinket .
Itrustedafart
I'm imagining a tiny, quite alive pilot inside the fighter. And he's thrown up just everywhere.
RazorSharpCoffeeLid
And also dead.
DingusMajoris
Then, 65 million years from now, scientists will clone tiny TIE pilots from his blood and open Stormtrooper Park!
DrLOAC
See Robotchicken Q wing skit.
asianmilkspray
But how did they get a TIE fighter into a cube in the first place?
thekeyofe
?noredirect
Bigblackdick69
HappyShark
More confused than a termite stuck in a yo-yo
mobileimgurlags
Why not just make the mold a ball originally
TurtIeproof
Beautiful even if Gifs That End Too Soon.
ThatsWhoreShit
I think the cube was more interesting.
MycolTheFunguy
I wish they left the pedestal on it, honestly.
UseTheForceLuke
The refraction and distortion of the sphere kinda ruins the look for me...
Owlsdude
Same and more cinematic, more empty space around the ship highlights it
XdashXexclamationVapostropheapostrpheQ
Found the Borg.
naytorin
Star Worb
Keifer6644
I need to get in to resin pours
Stoneleigh219
I’d like to see one with Luke’s X Wing mostly submerged in the swamp
3Davideo
Or maybe the second one, which also sank into the swamp. Or the third, that burned down, fell over, ?ℎ?? sank into the swamp.
Chort26
flavivsaetivs
https://youtu.be/-E0h6Pu6t5s
Ogri
Where does all the waste microplastic go ?
itdoesntmatternoneofthismatters
Sea turtles.
theimgurappsucksballs
Golgothanworm
"Sad Beep"
iDontKnowAllYourSecrets
Something, something .. always a gif.
WhiteRhino723
Perfect
rodgertheshrubber
Do a barrel roll!
"You're becoming more like your father."
sauceonthesideplease
ThatQuietlySmirking
How does he throw up with the mask on?
danomyces
the suit absorbs it all. He's non-stop pissing, shitting, vomiting
RazzleDazzle69
Does he feel anything if he's in 0 G?
I would imagine he's actually in microgravity, being so close to large bodies like the Death Star, Yavin, and Yavin IV.
vitaminalgas
Why didn't they just pour the epoxy in a cylinder to begin with?
ArchangelTitus
Cutting a circle of wood is difficult, a square is just tablesaw or band saw and quick.
albarca
Or... a sfere.
JDHannan
Very easy to make a square mold, especially one that fits the wood on the bottom. The winning move is to cut the corners off before turning
DrFighterpilotAttorneyAtLaw
Because lathe. But yeah, good call. I also wish it were an underwater crash site and it was covered in kelp and barnacles and rust.
benzalstonemason
Maybe an x-wing then
mdzmdz
techley
Still need the lathe to turn the cylinder into a sphere. This way just wastes a ton of resin.
2dPrdg
gotta maximize the amount of plastic that will end up in the oceans after lathing
assmaster4000
I just toss it on my pile of burning tyres to avoid that.
SilverFish0
katttrrr
Right? I was thinking about taking this up as a hobby.. but after watching this I'm pretty sure all the tools would bankrupt me ?
Kunitsu
if your patient enough, you can do this with a cheap belt sander and a buffer tool and some hand sanding for the high grit sanding =D
the patience is the hard part though... sanding takes fucking forever when done by hand X'D
For epoxy you can use any water tight container
WhiteAntelope
I mean cutting a relatively circular shape isn't that hard in my experience
It is a cunt for myself on the bandsaw
DrKriegersClone
Unless you lathe the wood first. Obviously got a holder to do so.
Then you need to reattach and have a mold the right size. The square is still far easier.
Depends on the numbers. If it's a one-off, probably yes. If you're doing a lot the same size, the trouble of making a fitted round mold 1/
2/ is probably justified to save the resin costs.
temposaur
Needs more resin
BurnieCinders
/r/epoxyhate
Yellowchopsticks
MutteringMisanthrope
MetaSomma
MetaSomma
But seriously, where do we buy these things?
lilmookieesquire
Epoxy shavings :(
DarksteelPenguin
I'll try spinning, that's a good trick!
Sleepingpanda1260
chrochtato
i was like "noo don't cut the support, can't use it as butt plug without it."
ButIBuildAThousandBridges
Well, not with that attitude.
snooch2thegouch
Psionickitten
This is a buff.
Zega000
Now it can roll off your shelf
GreatDaneGirl
Can people give a few more seconds of video to the final product? You wielded hard, I watched the boring lathe part, I need to see it better
jodeum21383950
If only there was a pause button.
GreatDaneGirl
Valid point, but I sort of wanted to see the video showing it from several sides.
Prometheus94
Do you ever go too far and knick the object in the sphere? I feel like I would be too nervous to mess up the subject in the resin.
Zahnradfee
So much microplastic!
EdinburghSwordmaker
Source https://www.instagram.com/scottsminiwoodshop/?hl=en
Shuey
Why not keep it square? ?
tremblesosoftly
I like the part that it goes fast
staryjdido
Perfect example of why this planet has no chance. Just imagine the trail of the oil used and wasted to make this plastic trinket .
Itrustedafart
I'm imagining a tiny, quite alive pilot inside the fighter. And he's thrown up just everywhere.
RazorSharpCoffeeLid
And also dead.
DingusMajoris
Then, 65 million years from now, scientists will clone tiny TIE pilots from his blood and open Stormtrooper Park!
DrLOAC
See Robotchicken Q wing skit.
asianmilkspray
But how did they get a TIE fighter into a cube in the first place?
thekeyofe
Bigblackdick69
HappyShark
More confused than a termite stuck in a yo-yo
mobileimgurlags
Why not just make the mold a ball originally
TurtIeproof
Beautiful even if Gifs That End Too Soon.
ThatsWhoreShit
I think the cube was more interesting.
MycolTheFunguy
I wish they left the pedestal on it, honestly.
UseTheForceLuke
The refraction and distortion of the sphere kinda ruins the look for me...
Owlsdude
Same and more cinematic, more empty space around the ship highlights it
XdashXexclamationVapostropheapostrpheQ
Found the Borg.
naytorin
Star Worb
Keifer6644
I need to get in to resin pours
Stoneleigh219
I’d like to see one with Luke’s X Wing mostly submerged in the swamp
3Davideo
Or maybe the second one, which also sank into the swamp. Or the third, that burned down, fell over, ?ℎ?? sank into the swamp.
Chort26
flavivsaetivs
https://youtu.be/-E0h6Pu6t5s
Ogri
Where does all the waste microplastic go ?
itdoesntmatternoneofthismatters
Sea turtles.
theimgurappsucksballs
Golgothanworm
"Sad Beep"
iDontKnowAllYourSecrets
Something, something .. always a gif.
WhiteRhino723
Perfect
rodgertheshrubber
Do a barrel roll!
WhiteRhino723
"You're becoming more like your father."
sauceonthesideplease
ThatQuietlySmirking
How does he throw up with the mask on?
danomyces
the suit absorbs it all. He's non-stop pissing, shitting, vomiting
RazzleDazzle69
Does he feel anything if he's in 0 G?
ThatQuietlySmirking
I would imagine he's actually in microgravity, being so close to large bodies like the Death Star, Yavin, and Yavin IV.
vitaminalgas
Why didn't they just pour the epoxy in a cylinder to begin with?
ArchangelTitus
Cutting a circle of wood is difficult, a square is just tablesaw or band saw and quick.
albarca
Or... a sfere.
JDHannan
Very easy to make a square mold, especially one that fits the wood on the bottom. The winning move is to cut the corners off before turning
DrFighterpilotAttorneyAtLaw
Because lathe. But yeah, good call. I also wish it were an underwater crash site and it was covered in kelp and barnacles and rust.
benzalstonemason
Maybe an x-wing then
mdzmdz
techley
Still need the lathe to turn the cylinder into a sphere. This way just wastes a ton of resin.
2dPrdg
gotta maximize the amount of plastic that will end up in the oceans after lathing
assmaster4000
I just toss it on my pile of burning tyres to avoid that.
SilverFish0
katttrrr
Right? I was thinking about taking this up as a hobby.. but after watching this I'm pretty sure all the tools would bankrupt me ?
Kunitsu
if your patient enough, you can do this with a cheap belt sander and a buffer tool and some hand sanding for the high grit sanding =D
Kunitsu
the patience is the hard part though... sanding takes fucking forever when done by hand X'D
ArchangelTitus
Cutting a circle of wood is difficult, a square is just tablesaw or band saw and quick.
vitaminalgas
For epoxy you can use any water tight container
WhiteAntelope
I mean cutting a relatively circular shape isn't that hard in my experience
ArchangelTitus
It is a cunt for myself on the bandsaw
DrKriegersClone
Unless you lathe the wood first. Obviously got a holder to do so.
ArchangelTitus
Then you need to reattach and have a mold the right size. The square is still far easier.
DrKriegersClone
Depends on the numbers. If it's a one-off, probably yes. If you're doing a lot the same size, the trouble of making a fitted round mold 1/
DrKriegersClone
2/ is probably justified to save the resin costs.